KDP Spine Width and Cover Size Calculator
Enter the trim size, the page count and the paper, and get the spine width, the full cover size with bleed, the pixels at 300 dpi and whether the spine can carry text. Then download a template drawn to scale for your designer.
Runs in your browser. Nothing you type or open is sent anywhere.
The Formula
KDP gives the arithmetic for paperbacks, and this is all the calculator does:
- Spine = page count x paper thickness: 0.002252 in for white paper or standard colour, 0.0025 in for cream, 0.002347 in for premium colour.
- Full width = 0.125 + trim width + spine + trim width + 0.125.
- Full height = 0.125 + trim height + 0.125.
The 0.125-inch bleed on every side is cut off; artwork runs into it so no white edge shows. Keep text and faces at least 0.125 inch inside the trim. The barcode goes at the bottom right of the back cover, 2 by 1.2 inches; leave it clear or KDP prints it on your art.
The page count must be the real one from your print PDF, with its blank pages, and it’s always even. A change of font or trim size changes it, and then the spine. The guide to formatting for KDP covers the interior side, including the gutter, which the calculator also gives.
The Template
The template is an SVG drawn in inches, which any design program opens at the right size: bleed in pink, the trim line, the safe areas dashed in blue, the spine between two red folds, and the barcode’s box. The PNG is the same at 300 dpi. Put it on a layer under your artwork, and hide it before you export.
In Shiro
Shiro’s Export makes the print PDF to KDP’s rules, with the gutter for the page count, and its KDP checklist checks the cover image of the ebook. It doesn’t draw the print cover: that’s yours or your designer’s, using this template.
The Questions People Ask
How do I calculate the spine width for KDP?
Multiply the page count by the paper’s thickness: 0.002252 inch a page for white paper, 0.0025 for cream, 0.002252 for standard colour and 0.002347 for premium colour. A 300-page book on white paper has a spine of 0.676 inch.
What size should a KDP paperback cover be?
The width is the bleed, the back cover, the spine, the front cover and the bleed again: 0.125 + trim width + spine + trim width + 0.125 inch. The height is the trim height plus 0.25 inch. Save it as a PDF at 300 dpi.
Can I put text on the spine?
Only on books of more than 79 pages, and KDP asks for at least 0.0625 inch between the text and each edge of the spine. The template marks that area.
What about hardcovers?
KDP’s hardcover case adds a board, a hinge and a wrap that it doesn’t give a formula for, so we don’t guess. Use the cover calculator on KDP’s own site for the template; this page gives the facts we can check.
Last revised November 2026.